首頁 | 關於我們 | 新聞 & 回顧 | 經銷代理商 |
     
 
 

RocketStor 6414AS - 4 槽 6Gb/s SAS/SATA
硬體磁碟陣列塔式機箱

  • 一個 SFF-8088 連接埠
  • 業界認證的硬體磁碟陣列架構,儲存陣列可獨立運作不佔用系統資源,提供絲毫不打折扣的傳輸效能與穩定度
  • 四個支援熱抽換的硬碟/固態硬碟抽取盒
  • 可支援高達四個 8TB SATA 硬碟和固態硬碟,最高支援 32TB 儲存容量
  • 還有一個額外的 Mini-SAS 連接埠,可連接四個 SAS/SATA 硬碟或固態硬碟
  • 支援磁碟陣列層級 0, 1, 5, 6, 10, JBOD
  • 硬碟、固態硬碟的混合儲存解決方案
  • DV 模式技術為 4K 或高畫質影像編輯或串流帶來高穩定、頂級效能表現。
  • 易於使用的磁碟陣列管理軟體
  • 與 Windows, Linux, FreeBSD 和 Mac 作業系統相容

 

硬體架構 規格說明 軟體下載 常見問題 新聞發佈 & 評測 其他資源

常見問題

1. Cannot see RocketStor RAID Array or Drives.

Q: Why can I not see or access the RAID array?

A: Below are several possible causes and solutions to this problem:

  • The RAID Controller is not detected by the OS or the Driver is not installed correctly. In this case, please consult the product’s user guide to verify the controller and driver status.
  • The RAID status is disabled or the disk(s) is not connected or has been unplugged. Please login to the WebGUI and check the RAID status. If any of the RAID disks are not detected, please check the cable connection or the disk enclosure’s power supply.
    If one or more of the RAID disks are not detected, and the RAID status is disabled, please double-check the cable and disk tray connections of the undetected disks to see if the issue is related to the disk or the host side connections. Reconnecting the cables or reinserting the disk tray may correct the disabled status.
  • The disks are detected as separate, single drives – the RAID configuration is lost. In this case, please consult the User Guide and follow the procedure to recover the array’s RAID Information.

2. Can’t find or mount the RAID disk volume.

Q: How to recovery the damaged/lost RAID volume?

A: If the array status is normal, and all drives are detected, this problem could be the result of damage to either the RAID array’s partition table, or volume information sector. In this case, recovering the partition table or volume information sector may enable access to the array.
If you suspect this may be the cause, we recommend contacting a 3rd party data recovery specialist. Do not attempt to recover, alter or recreate the array. In addition, do not reformat or run diagnostics on any of the disks.
(If the array’s status is normal. This problem could be related to a damaged partition table or volume information sector. )