Specifications

Bus Interface PCI-Express 3.0 x16
Number of Channel / Port 3* 2280 M.2 NVMe port (Dedicated PCIe 3.0 x4 per port)
Data Transfer Rates 8GT per lane / 8Gbps per lane
Number of Devices
  • 3x M.2 NVMe SSD
  • 16x SAS/SATA Drive
Form Factor Full-Height
Dimensions 5.97" x 2.68" x 0.06"
Weight 0.77 lbs.
Operating System Support Windows 10 64-bit
macOS (coming soon)
Linux Kernel 3.3 or later
Cooling Fan Aluminum casing with single 50x50mm fan blower
RAID Mode Support Single, RAID 0, 1, 5* (For Mac support, please contact Sales)
TRIM RAID Support
  • Windows: Single, RAID 0, 1
  • Linux: Single, RAID 0, 1
Storage Mode - NVMe Bootable & Data RAID
RAID Management Suites
  • Browser-Based management tool
  • CLI (Command Line Interface - scriptable configuration tool)
  • API package
SMTP Email Alert Notification Yes
Storage Health Inspector Yes
NVMe SMART status Yes
Global Hot Spare Disk support Yes
Automatic and configurable RAID Rebuilding Priority Yes
Auto resume incomplete rebuilding after reboot Yes
Single-RAID or Multi-RAID Arrays per Controller Yes
Cross-Sync RAID Solution Across Controllers Yes
Working Temp +5°C ~ + 55°C
Storage Temp -20°C ~ +80°C
Operating Voltage PCI-e: 12V, 3.3V
Power Typical: 8W
MTBF (Mean Time Before Failure) 920,585 Hours
Certification / Approval FCC, CE, ROHS & REACH
SAS Port 16 internal SAS 12Gb/SATA 6Gb Ports
(4* SFF-8643 Connector)
RAID Level Support 0, 1, 5, 6, 1/0**, 50 and JBOD / Non-RAID Mode  
SAS Enclosure Management Interface SGPIO
Storage Health Inspector (SHI) Yes
Redundant RAID Configurations Yes
Multiple RAID Partitions supported Up to 4
Storage Configurations Direct Attached
Online Array Roaming Yes
Online RAID Level Migration (ORLM) Yes
Online Capacity Expansion (OCE) Yes
RAID Quick Initialization for fast array setup Yes
Drive hot-plug support Yes
Global Hot Spare Disk support Yes
Automatic and configurable RAID Rebuilding Priority Yes
Auto resume incomplete Rebuilding after power on or reboot system Yes
Disk Format compatible  512, 512e, 4Kn
Larger than 2 TB Drive and RAID Array support Yes
Spin down Massive Arrays of Idle Disks support Yes
Native Command Queuing Yes
SAS TCQ Yes
Disk media scan and repair Yes
Device Error Recovery support Yes
Automatic remap and fix drive bad block for RAID array Redundant RAID Levels (RAID 1, 5, 6, 1/0, 50)
Staggered Drive Spin Up Yes (Spin up 4 disk every 2s)
Write Back and Write Through Yes
Retail Box Dimensions 13.38” L x 7.68” H x 2.76”
Retail Box Weight 1.29 lbs.
Kit Contents
  • 1x SSD7110 RAID Controller
  • 1x Quick Installation Guide

8643-4SAS-1M
1M SFF-8643 SAS to 4x SFF-8482 SAS cable The 8643-4SAS-1M cable is designed for use with the SSD7110, RocketRAID 3740A and RocketRAID 840A RAID controllers, and has been tested with a wide range of enterprise and Pro-NAS class SAS hard drives up to 14TB in capacity.

8643-4SATA-1M
1M SFF-8643 SAS to 4x SATA cable The 8643-4SATA-1M cable is designed for use with the SSD7110, RocketRAID 3740A, RocketRAID 2840A and RocketRAID 840A RAID controllers, and has been tested with a wide range of cost-effective SATA hard drives up to 14TB in capacity.

* RAID 5 does not support TRIM
** RAID 1/0 is the equivalent of RAID 10