Specifications

Bus Interface PCI-Express 3.0 x16
Number of Channel / Port 4* U.2 NVMe port (Dedicated PCIe 3.0 x4 per port)
Data Transfer Rates 8GT per lane / 8Gbps per lane
Number of Devices 4x U.2 NVMe SSD
Form Factor Low profile
Dimensions 5.97” L x 2.68” H x 0.06” D
Weight 0.77 lbs.
Operating System Support Windows 10 64-bit
Linux Kernel 3.3 or later
Cooling Heat sink
Storage Mode Data storage
RAID Mode Support Single, RAID 0, 1, 5*, 1/0* (Mac support available in July 2018)
Management Suites Browser-Based management tool
CLI (Command Line Interface - scriptable configuration tool)
API package
SMTP Email Alert Notification Yes
Alarm Buzzer Yes
Storage Health Inspector Yes
NVMe SMART status Yes
Global Hot Spare Disk support Yes
Automatic and configurable RAID Rebuilding Priority Yes
Auto resume incomplete rebuilding after Yes
Single-RAID and Multi-RAID Arrays per Controller Yes
Cross-Sync RAID Solution over multi-SSD7120 Controllers Yes
Work Temp +5°C ~ + 55°C
Storage Temp -20°C ~ +80°C
Relative Humidity 5% ~ 60% non condensing
Operating Voltage PCI-e: 12V, 3.3V
Power Typical: 8W
MTBF (Mean Time Before Failure) 920,585 Hours
Certification / Approval FCC, CE, ROHS & REACH
1x SSD7120 RAID Controller
1x Low Profile bracket
1x Quick Installation Guide

HighPoint 8643-8639-50
SFF-8643 to U.2 SFF-8639 connector with 15-pin SATA Power Connector
Length: 19" (50CM)

The Cable has been tested with the HighPoint SSD7120 NVMe U.2 NVMe RAID Controller, and major U.2 SSDs from Intel, Micron, and the HGST Ultra series.

* RAID 5 and 10 do not support TRIM