HighPoint Global Web Support

Browse FAQ Browse FAQ

Home | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z |

Previous | NextShowing 16 to 28 of 28
ID Title Date Author Keywords Traffic
faq FAQ0031All components
“Disabled” markI saw a “Disabled” mark shown on RAID management GUI applications and I couldn’t access my RAID disk.
Jun 1st 2012HighPoint Global SupportThe “Disabled” mark is shown on RAID management GUI Applications403
faq FAQ0030All components
“Critical” markI saw a “Critical” mark shown on RAID management GUI applications and what does it mean.
Jun 1st 2012HighPoint Global SupportThe “Critical” mark is shown on RAID management GUI Applications413
faq FAQ0027All components
Why does the RAID initialization take so long to complete, which method should I choose ?Which RAID initialization method should I use for my RAID array?
Apr 19th 2012HighPoint Global SupportRAID initialization, Foreground, Background or No Init872
faq FAQ0022All components
I attached the Mac OS X boot drive to my controller but it will not boot.How do I get my controller to boot to Mac OS X?
Apr 19th 2012HighPoint Global SupportBoot to Mac OS X, EFI430
faq FAQ0020All components
After rebooting my system the RAID array is no longer accessible and all of the disk are reported as LegacyHow can I recover my RAID array if all of the HDD are reported as Legacy?
Apr 19th 2012HighPoint Global SupportLegacy, RAID no accessible741
faq FAQ0019All components
I tried to update the BIOS on the controller but the utility keeps reporting cannot find host adapter.When I try to update the controller BIOS, the utilities will report that no host adapter is found. How can I fit this?
Apr 19th 2012HighPoint Global SupportBIOS update, host not found.727
faq FAQ0013All components
During the rebuild of the RAID array the progress has stopped and does not continueHow do I make a RAID rebuild continue after it has stopped?
Apr 19th 2012HighPoint Global SupportRAID rebuild progress stopped, continue rebuilding515
faq FAQ0012All components
The status of the RAID array is "Disable" after 1 disk was reported bad. How can I rebuild or repair my RAID arrayHow do I recover the RAID array if the status is reported as Disabled?
Apr 19th 2012HighPoint Global SupportDisable RAID array, rebuild and repair857
faq FAQ0011All components
After rebooting my system the RAID array is no longer accessible and all of the disk are reported as LegacyHow do I recover the RAID array, all HDD’s are reported as Legacy after I reboot the system?
Apr 19th 2012HighPoint Global SupportRAID no longer accessible, rebooting, Legacy663
faq FAQ0009All components
The new 4TB HDD is not detected by the controllerDoes your controller support 4TB HDD’s?
Apr 19th 2012HighPoint Global Support4TB HDD, BIOS detection, disk not detected698
faq FAQ0008All components
The new 3TB HDD is not detected by the controllerDoes your controller support 3TB HDD’s?
Apr 19th 2012HighPoint Global Support3TB HDD, BIOS detection, disk not detected626
faq FAQ0003All components
When RAID is configured on the controller the system will not boot upWhen I create a RAID array on the controller, the system does not boot from my onboard SATA controller it tries to boot to the RAID array on the RocketRAID controller?
Apr 19th 2012HighPoint Global SupportCan’t boot up,Configured as RAID, system hang1368
faq FAQ0002All components
Blank Screen when controller is installedI get a blank screen when the card is installed in my system?
Apr 19th 2012HighPoint Global SupportBlank screen, can’t boot, BIOS resources issue, INT13 disable984
About HighPoint Global Support Visit HighPoint website at www.highpoint-tech.com